Skip to the content

ZIRCON StudSensor™ HD70

SKU: ZN-HD70

Barcode: 042186662375

Deep Scanning Stud Finder with WireWarning® Detection and Backlit Display

The StudSensor™ HD70 center finding stud finder boasts more design innovations by Zircon. Featuring an enhanced bright, backlit LCD display, it debuts a new Target Spotlight that illuminates on-screen when you’ve found the center of a stud. A low battery indicator also lets you know when your battery should be replaced for optimum performance. Select from two stud scan modes to find the center, edges, and direction of wood and metal studs while also avoiding live AC electrical wiring.

Features:

  • StudScan mode locates the center, edges, and direction of wood or metal studs up to ¾ in. (19 mm) deep.
  • DeepScan mode® doubles the scanning depth to 1½ in. (38 mm)
  • WireWarning® detection indicates the presence of live, unshielded AC electrical wiring up to 2 in. (51 mm) deep
  • ACT™ (Auto Correcting Technology) automatically corrects common errors, such as when scanning begins over a stud
  • Backlit LCD display with Target Spotlight indicates the direction and edge of the stud and illuminates when the center of the stud is detected
  • Low battery indicator for optimum performance
  • Signal Strength indicator helps to distinguish between shallow and deep targets
  • SpotLite® Pointer shines an arrow-shaped light on the wall to clearly indicate the edge of the stud
  • Translucent base and illuminated “V” marker groove for more accurate marking of stud edge location
  • Rubber handle for non-slip grip

Specifications:

  • Dimensions: 180mm x 74mm x 34mm
  • Weight: 159g (without battery)
  • Battery Type: 9V alkaline, required
  • Depth: StudScan mode is up to 19mm and DeepScan® mode is up to 38mm
  • Position Accuracy: Up to a depth of 19mm is within 3mm for centre and 5mm for edge - Up to a depth of 38mm is within 5mm for centre
  • WireWarning Position Accuracy: Typically 90-250 V at 50-60 Hz within 6 in. (152 mm) of a hot unshielded wire in drywall
  • WireWarning Depth: In typical wall with Romex wiring, wire can be detected up to 2 in. (51 mm) deep
  • Operating Temperature: -7° to 41°C
  • Storage Temperature: -29° to 66°C
  • Humidity: 5 - 90% RH (non-condensing)
  • Water Resistance: Splash and water resistant, not waterproof
Account